See Gallery for more pictures
Highlight your art with the elegant and stylish Ektralamp LED picture lights. These LED lamps are available in standard widths of from 10" to 60" but can be custom-built to any size to illuminate your hanging artwork. The inconspicuous light tubes are less than one inch in diameter and are available in aluminum, satin brass, black, or bronze colors. Using LED technology, the lamps protect your precious artwork by radiating no heat or UV, and consuming little energy.
With 18 LEDs for each foot of light, these unique art lamps provide even distribution of light across your picture with no hot or dark spots. You'll never again need to replace a light bulb, as the LEDs have an expected useful life of over 50,000 hours (about seven years of continuous use).
Whether you have prints, etchings, oil paintings, photographs, old masters, fine art, or just favorite pictures, you can proudly show off your treasures with the effective illumination provided by the Ektralamp picture lights. Natural color brings out all of the details of your artwork.
Our unique design eliminates light spillage to such an extent that it is often hard to detect the source of illumination.
The lamps project seven inches in front of the picture. The lamps can be mounted either to the back of the picture frame or to the wall behind the picture, Using low voltage (12 volts) thin wires can be snaked through the wall. An optional remote control can be used to turn the light on or off and adjust the brightness of the light.
Normally we recommend that lamps be approximately four inches shorter than the width of the picture (measured inside the frame). This sizing will assure that the width of the art is lighted with minimum spillage on the wall. We can build lamps to any size in one inch increments.
Ektralamp art lamps can be mounted either to the back of the picture frame or to the wall behind the picture. The height of each lamp is adjustable.Ten inch wide lamps have a single mounting leg. Lamps between 12" and 40" have two mounting legs, with larger pictures having three or more mounting legs depending upon the size of the lamp. We can provide custom mounting for your unique situation.
The standard light color for the art lamps is 3000K, and we can also provide a daylight color of 5000K
Ektralamp lights are all made in the USA in our shop near Cleveland, Ohio, enabling us to rapidly respond to custom requests from our American and Canadian customers.
Standard art lamp colors (other colors can be custom ordered - call to discusss.)
Order Now On-Line
We accept major credit cards and PayPal
To speak with us about these lamps or to order by phone, call 440-871-0976
Remore control art lamp dimmer
The Ektralamp remote contol dimmer lets you turn the lamp on/off and control the brightness using a radio frequency fob (two fobs included). The dimmer is wired between the power adapter and the lamp, and can be placed at any convenient location as it does not need to be in the line of sight of the fob. A single remote dimmer can control one or more lamps, or a separate control can be used for each lamp.
To order your dimmer on-line proceed to the store. The price is $49.95 plus shipping.
For more information on selecting the lamp that is right for your needs call Will at 440-871-0976 to discuss your requirements.